Cast Cutter

Products

Item#

Information

295-200

M-PACT AMERICAN ORTHOPEDIC CAST CUTTER
Heavy duty cast cutter can be used both in fabrication setting or in clinical use. The cast cutter combines speed, balance and quiet operation with durability. Balance of weight and power helps decrease user fatigue which often occurs during long term usage. Hexagonal drive shaft has been utilized to provide positive drive and prolong blade wear. When necessary, the blades may be changed quickly and easily. Solid, permanently lubricated bearings and durable switch provide smooth, maintenance-free operation. 115-V. Heavy Duty Cast Cutter.
Autopsy Saw
Price: $ 955.54

M-PACT AMERICAN ORTHOPAEDIC™ PORTABLE CAST DUST VACUUM

0295-300

0295-175

M-PACT AMERICAN ORTHOPEDIC™ PORTABLE CAST DUST VACUUM
Provides, power and quality. Convenient storage system provides a place for a cast spreader, scissors, replacement blades and the filter storage caps. Filter system collects cast dust in a unique disposable filter cartridge. No more messy bags. Replacement is quick, easy, and clean. Reliable, high speed, 1HP motor with permanently-lubricated and sealed bearing provides smooth, maintenance-free operation. System comes complete with a 6 foot heavy-duty hose, 6 hose/cord straps, mounting brackets, and instructions. Attaches to any M-PACT® cast cutter. Adaptors available for most competitive models. One-year limited warranty. 115 VAC/AC, 60 Hz, 5.0 amps.

Price: $ 888.08

Filter Cartridge $70.06

0295-400

Mobile Vaccum

115 VAC, 50-60 Hz, 8.5 Amps. One American Orthopaedic™ Cast Dust Vacuum, Owner's Manual, and Vacuum Nozzle Adapter.

AMERICAN ORTHOPAEDIC™ Vacuum's quiet operation eases patient fears through reduction of noise. However, it is powerful enough to pick up even fine particles. M-PACT vacuums are the only vacuums that incorporate a unique filter cartridge thus creating a safer environment. Once the dust enters the filter it is traped. Other vacuums use paper bags that are messy to clean. It doesn’t make sense to vacuum the dust when removing the cast and then spill it all over the office. This will not happen with the M-PACT cartridge system. The remote on/off switch gives the ability to use the vacuum alone or with the saw.

Price: $1572.50

TCFC1 VACCUM CATRIDGE $70.06

21-0136

M-PACT LARGE HOSPITAL MODEL CAST SPREADER
For use with large or thick casts. Solid stainless steel resists corrosion and rough handling. Designed for two hand operation with optimum location of pivot user with superior leverage and control.

$260.28

Cast Cutter With Vacuum TCCVS1 pictured
Vacuum Sold Separately

TCCSS1

M-PACT TURBOCARE® CAST SAW
Designed to reduce noise to a minimum resulting in less emotional trauma for patients and less hearing trauma for clinician. Innovative motor plus saw design delivers high power in a smaller, lighter package. Automated multi-speed control with "turbo-mode" for increased power. The unique design enhances the saw's balance and ergonomics for more user comfort. The disposable filter cartridge traps more dust particles without clogging and is easy and safe to replace. Remote on/off switch gives the ability to use the vacuum alone or with the saw. Cast saw supplied with 10 ft cord and hospital grade plug, one 2.5" diameter multi-purpose blade, wrench, owner's manual, and registration card. ( Vaccum is not included, price is for the Saw only)
The TURBOCARE® Cast Saw supplied with a 10' cord and hospital grade plug, one(1) 2.5" diameter multi-purpose blade, wrench, owner's manual and registration card.
Measurements for the Cast Saw:
Length: 8" (20.3 cm)
Width: 2.5" (6.4 cm)
Height: 7" (17.8 cm)
Weight: 2.5 lbs.(0.9 kg)

Price: $ 1987.75

TCFC1 VACCUM CATRIDGE $70.06

To be used only with TCCSS1

TCCVS1

TURBOCARE® VACUUM. The vacuum's quiet operation eases patient fears through reduction of noise. However, it is powerful enough to pick up even fine particles. M-PACT vacuums are the only vacuums that incorporate a unique filter cartridge thus creating a safer environment. Once the dust enters the filter it is trapped. Other vacuums use paper bags that are messy to clean. It doesn’t make sense to vacuum the dust when removing the cast and then spill it all over the office. This will not happen with the M-PACT cartridge system. The remote on/off switch gives the ability to use the vacuum alone or with the saw.
The TURBOCARE® Cast Dust Vacuum is supplied with a per-installed Disposable Filter Cartridge, 8.5' x 1" I.D. hose, 6 hose/ cord straps, vacuum nozzle adapter, owner's manual and registration card.
Measurements:
Length: 23" (58.4 cm)
Width: 15" (38.1 cm)
Height: 23" (59.7 cm)
Weight: 25 lbs.(11.3 kg)
Price: $ 1390.14

TCFC1 VACCUM CATRIDGE $70.06

M-PACT CAST CUTTING BLADES
Plaster blade is made from hardened stainless steel. Teflon® coated blades reduce friction to improve cutting performance in fiberglass. Dicronite® coated blades use a lubricant that improves cutting performance in plaster or fiberglass. Titanium Nitride blade uses a ”gold” coating for cutting fiberglass or plaster. Two Section blades, one with pine drive and one with arbor fitting, made of hardened stainless steel for cutting cast windows or bone specimens. Universal hub allows blades to fit most cast cutters.
31-0168 Titanium Nitride Blade, 2.5" Diameter, Universal Hub $49.00

0295-225 Dicronite® Cast Butting Blade, 2" Diameter, Universal Hub $46.00

0295-226 Dicronite® Cast Butting Blade, 2.5" Diameter, Universal Hub $46.00

0295-275 S.Steel Sectioned Blades, 2.5" Diameter, Arbor Drive (Autopsy Blade) $ 135.00

4183-110 S.Steel Blade, 2" Diameter, Universal Hub, 6/bx $87.00

4183-112 S.Steel Blade, 2.5" Diameter, Universal Hub, 6/bx $87.00

4183-114 Teflon® Blade, 2" Diameter $40.00

31-0265 # 31-0265 Teflon® Blade, 2-1/2" (6cm) Diameter, Universal Drive
Teflon Coated Blade $40.00

4183-145 Stainless Steel Sectioned Blades, 2.5" Diameter, Pin Drive (Autopsy Blade) $74.00